SARAMONIC

  • Saramonic SR-M3 Mini Directional Condenser Microphone for Camera

    Specification:
    Frequency Response:75 Hz to 18 kHz
    Type of Microphone: Directional Condenser
    Sensitivity: -37dB +/- 1dB
    Signal to Noise Ratio: 75dB SPL
    Battery: 1 x AAA
    Outputs: 1 x wired male 1.8” (3.5 mm) TRS output, 1 x female 1.8” (3.5 mm) headphone output
    Input: 1 x female 1.8” (3.5 mm) mic input
    Dimensions: 5.5 x 2.3 x 1.6″ (14 x 5.8 x 4.1cm)
    Weight: 30g (2.1 oz)

    Packaging Includes:
    1 x SR-M3 shotgun microphone
    1 x foam windscreen

    Read more
    Quick View
  • Saramonic SR-MSM500 Stereo Bar Dual Adjustable Microphone Mount

    Specification:
    Threaded Microphone Mounting Points: 3/8“ Male
    Bottom Center Mount: 5/8“ Female (3/8“ or 1/4” 20 Female using included adapters)
    Distance Markers: 10, 15 & 20cm
    Angle Markers: 90° & 120°
    Dimensions: 24 x 5.5 x 7.5 cm (9.5 x 2.125 x 3”)
    Weight: 185 g (6.5 oz)

    Packaging Includes:
    1 x SR-MSM500 Stereo mounting bar
    2 x Removable spacers
    2 x Mic Clips with 5/8” Threads
    3 x 3/8“ to 5/8“ thread adapter
    1 x Camera shoe-mount with 1/4 20 thread adapter
    1 x printed manual

    Read more
    Quick View
  • Saramonic SR-NV5X Directional Condenser Shotgun Microphone

    Specification:
    Frequency Response: 40 Hz to 18 kHz ±3dB
    Polar pattern: Cardioid
    Sensitivity: -35dB ±1dB/0dB=1V/Pa, at 1 kHz
    Signal to Noise Ratio: 80dB or more
    Output Impedance: 2000 ohm
    Power: 48V phantom
    Output Connector: 3-pin XLR (Balanced)
    Dimensions: 0.87 x 0.87 x 21.10” (21 x 21 x 536mm) *with Cable Included*
    Weight: 3.3 oz (96g)

    Packaging Includes:
    1 x SR-NV5X Shotgun Microphone
    1 x foam windscreen
    1 x furry windscreen
    1 x rubber spacer
    1 x printed manual
    1 x warranty card

    Read more
    Quick View
  • Saramonic SR-PAX2 Audio Mixer Adapter for Camera DSLR

    Specifications:
    Inputs: 2 x XLR 3-pin and 3 x 1/8″ (3.5 mm) TRS Mini Jacks (One Stereo, Two Mono)
    Outputs:1 x 1/8″ (3.5 mm) TRS Stereo Mini Jack output, 1 x 1/8″ (3.5 mm) TRS Stereo Mini Jack for headphone output
    Frequency Response: 20 Hz to 20 kHz, ±0.5 dB
    Total Harmonic Distortion: Less than 0.01% @ 1 kHz, -30 dBu input
    Signal to Noise Ratio: 80 dB @ 1 kHz, -30 dBu input
    Gain Inputs 1 & 2: Line: 0 dB, Mic/Phone: 20 dB
    Phantom Power Inputs 1 1/8” (3.5mm): 5V / 3V power supply
    Phantom Power Inputs 2 XLR Female: 48 V power supply
    Level Meters: -18 dB to +3 dB in 3 dB increments
    Power Requirements: 9V alkaline or lithium battery
    Battery Duration: 5 hours, typical with alkaline battery, 3 hours, typical with lithium battery
    Dimensions: (L x W x H)5.4 x 3.2 x 2.5″ (136.0 x 80.5 x 62.5 mm)
    Weight:13.5 oz (382.7 g)

    Package Included:
    1 x SR-PAX2 Multi-channel audio mixer
    1 x Short, coiled 3.5mm output cable with gold-plated connectors
    1 x Printed manual
    1 x Warranty card

    Read more
    Quick View
  • Saramonic SR-PMIC1 Cardioid Unidirectional Microphone

    Specification:
    Frequency Response: 80 Hz to 12 kHz
    Type of Microphone: Condenser
    Polar Pattern: Supercardioid
    Sensitivity: -32dB +/- 1dB
    Signal to Noise Ratio:70dB SPL
    Outputs: 2 x female 1.8” (3.5 mm) TRS, 1 for headphones, 1 for camera connection
    Dimensions: 6.3 x 2.3 x 1.6″ (16.2 x 5.9 x 4.1cm)
    Weight: 1.9 oz (55g)

    Packaging Includes:
    1 x SR-PMIC1 shotgun microphone
    1 x short, coiled cable with gold-plated mini-plug connectors
    1 x foam windscreen

    Read more
    Quick View
  • Saramonic SR-PMIC2 Mini Stereo Condenser Microphone for Camera

    Specification:
    Frequency Response:75 Hz to 15 kHz
    Type of Microphone: Stereo Condenser
    Polar Pattern: Cardioid
    Sensitivity: -40dB +/- 1dB
    Signal to Noise Ratio: 76dB SPL
    Outputs: 2 x female 1.8” (3.5 mm) TRS, 1 for headphones, 1 for camera connection
    Dimensions: 3.8 x 2.3 x 1.6″ (9.7 x 5.9 x 4.1cm)
    Weight: 1.8 oz (50g)

    Packaging Includes:
    1 x SR-PMIC2 stereo microphone with fixed windscreen
    1 x short, coiled cable with gold-plated mini-plug connectors

    Read more
    Quick View
  • Saramonic SR-PMIC3 Surround Recording Shotgun Microphone

    Specification:
    Frequency Response:40 Hz to 10 kHz
    Type of Microphone: Surround Condenser
    Polar Pattern: Cardioid
    Sensitivity: -37dB +/- 1dB
    Signal to Noise Ratio:80dB SPL
    Outputs: 2 x female 1.8” (3.5 mm) TRS, 1 for headphones, 1 for camera connection
    Dimensions: 5.1 x 2.3 x 1.6″ (12.9 x 5.9 x 4.1cm)
    Weight: 2 oz (59g)

    Packaging Includes:
    1 x SR-PMIC3 Surround microphone with fixed windscreen
    1 x short, coiled cable with gold-plated mini-plug connectors

    Read more
    Quick View
  • Saramonic SR-Q2 Stereo Handheld Audio Recorder

    Specifications:
    Recording Channels: 2
    Recording Format: .WAV (44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit, 88.2kHz/16bit, 96kHz/16bit)
    Playback Format: .WAV (44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit, 88.2kHz/16bit, 96kHz/16bit)
    A/D conversion: 24-bit, 128x Oversampling
    D/A conversion: 24-bit, 128x Oversampling
    Signal processing: 32-bit
    Recording Media: MicroSD (8-32GB), MicroSDXC (64-128GB)
    Display: Backlit LCD
    Built-in Stereo Microphones: Unidirectional Condensers, 90° X/Y Stereo Configuration
    Minimum Gain with Digital Attenuation: -30dB
    Microphone Input: 3.5mm (1/8”) Stereo Microphone Input
    Line Input: 3.5mm (1/8”) Line-Level Input
    Input Level: 0 to -45dB
    Output Impedance: 2 kΩ
    Line Output: 3.5mm (1/8”) Stereo Jack
    Output Load Impedance: 10 kΩ or more
    Rated Output Level: -10dBm
    Headphone Output Level: 20mW + 20mW into 32Ω load
    Built-in Speaker: 1W 8Ω
    USB Port: Type-C
    Power required: LR6 or Ni-MH AA battery X 2 or DC 5V via USB-C
    Recording hours: Alkaline Battery 13.5 Hours under 96kHz/16bit, 19.5 hours under 44.1kHz/16bit
    Dimensions: 2.4 x 6.6 x 1.2” (60 x 167 x 30 mm)
    Weight: 4.1oz (116g)
    Package Include:
    1 x SR-Q2 Portable Handheld Recorder
    1 x 8GB MicroSD Card
    1 x Protective Travel Case
    1 x High-Wind Furry Windscreen
    1 x Foam Windscreen
    1 x Hand Strap
    1 x 4’ (1.2m) Gold-Plated USB-A to USB-C Cable
    1 x User Manual
    1 x Warranty Card
    Read more
    Quick View
  • Saramonic SR-Q2M Metal Handheld Audio Recorder with Controller

    Specifications:
    Recording Channels: 2
    Recording Format: .WAV (44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit, 88.2kHz/16bit, 96kHz/16bit)
    Playback Format: .WAV (44.1kHz/16bit, 44.1kHz/24bit, 48kHz/16bit, 48kHz/24bit, 88.2kHz/16bit, 96kHz/16bit)
    A/D conversion: 24-bit, 128x Oversampling
    D/A conversion: 24-bit, 128x Oversampling
    Signal processing: 32-bit
    Recording Media: MicroSD (8-32GB), MicroSDXC (64-128GB)
    Display: Backlit LCD
    Built-in Stereo Microphones: Unidirectional Condensers, 90° X/Y Stereo Configuration
    Minimum Gain with Digital Attenuation: -30dB
    Microphone Input: 3.5mm (1/8”) Stereo Microphone Input
    Line Input: 3.5mm (1/8”) Line-Level Input
    Input Level: 0 to -45dB
    Output Impedance: 2 kΩ
    Line Output: 3.5mm (1/8”) Stereo Jack
    Output Load Impedance: 10 kΩ or more
    Rated Output Level: -10dBm
    Headphone Output Level: 20mW + 20mW into 32Ω load
    Built-in Speaker: 1W 8Ω
    USB Port: Type-C
    Power required: LR6 or Ni-MH AA battery X 2 or DC 5V via USB-C
    Recording hours: Alkaline Battery 13.5 Hours under 96kHz/16bit, 19.5 hours under 44.1kHz/16bit
    Dimensions: 2.4 x 6.6 x 1.2” (60 x 167 x 30 mm)
    Weight: 5.3oz (150g)
    Package Include:
    1 x SR-Q2M Portable Handheld Recorder
    1 x RC-X Remote Control
    1 x Lavalier Microphone with 6’ Cable, Alligator Mic Clip and Foam Windscreen
    1 x 8GB MicroSD Card
    1 x Protective Travel Case
    1 x High-Wind Furry Windscreen
    1 x Foam Windscreen
    1 x Hand Strap
    1 x 4’ (1.2m) Gold-Plated USB-A to USB-C Cable
    1 x User Manual
    1 x Warranty Card
    Read more
    Quick View
  • Saramonic SR-SMC1 Shotgun Mic Microphone Mounting Clip with Cold Shoe

    Specification:
    Fits most popular shotgun microphones including, but not limited to:
    Saramonic SR-NV5
    Rode: NTG1, NTG2, NTG3, NTG4, NTG4+,
    Sennheiser: MKE 600, MKH 416, MKH 60, ME 66 K6, MKH8060, MKH8070, MKH 418
    Azden: SGM-1X
    Audio-Technica: AT875R AT897, AT835ST, BP4029, AT4073, BP4073,
    Schoeps: CMIT 5U, SuperCMIT 2U
    Shure: VP82, VP89S
    Neumann: KMR-81i, KMR-81D,
    Sanken CS-1, CS-2, CS-3e
    Voice Technologies: VT500

    Read more
    Quick View
  • Saramonic SR-TM1 11″ Super Cardioid XLR Shotgun Microphone

    Specification:
    Frequency Response: 40 Hz to 20 kHz
    Acoustic Principle: Line gradient
    Polar Pattern: Cardioid
    Sensitivity: -35 +/- 3dB
    Output Impedance: 200 ohM
    Max Output: 10 dBu
    Dynamic Range: 119 dB
    Max SPL: 135 dB
    Signal to Noise Ratio: 75 dB SPL
    Filter: High-pass 150 Hz
    Battery: 48V Phantom or 1400 mAh internal lithium battery (150 hours)
    Output Connector: 3-pin XLR (Balanced)
    Dimensions: 11.1 x .9 x .9″ (28.2 x 2.3 x 2.3cm)
    Weight: 6 oz (171g)

    Packaging Includes:
    1 x shotgun microphone
    1 x short XLR cable
    1 x microphone clip with camera-shoe mount
    1 x USB charging cable
    1 x foam windscreen
    1 x printed manual
    1 x warranty card

    Read more
    Quick View